<aside> ⚠️ Package does not include tools for installation

</aside>

<aside> ℹ️ We recommend using the services of an experienced gunsmith - CZ usualy glues the trigger container and safety selector screws and may need to be drilled out

</aside>

Installation

1. Pull out the magazine and check chamber of the firearm
2. Switch the safety lever to self-loading mode and lock the cocking lever in the rear position
3. Tap out the factory magazine release roll pin from the lower receiver
4. Keep the spring and fit it into the hole at the top of the new magazine release
5. Put the two-part assembly into the magazine well and tap in the stainless roll pin
6. Make sure the roll pin is centered in the lower receiver
7. Point the weapon into a safe area and check the operation of the firearm

https://youtu.be/-XLw85fCF3Y?list=PLvJ_L2qlPmk3rhHfKDxe0kj4A69uJxony