<aside> ⚠️ Package does not include tools for installation

</aside>

<aside> ℹ️ We recommend using the services of an experienced gunsmith - CZ usualy glues the trigger container and safety selector screws and may need to be drilled out

</aside>

Installation

1. Pull out the magazine and check chamber of the firearm
2. Switch the safety lever to self-loading mode and lock the cocking lever in the rear position
3. Push the captive pin out of the lower part of the gun and separate the upper and lower receivers
4. Unscrew the set screw of the right hand safety selector and slide the switch assembly out of the trigger container
5. Unscrew the trigger container screw from the lower receiver through the hole in the trigger guard
6. Pull the trigger mechanism assembly out of the lower receiver and push out the trigger shoe roll pin
7. Fit the new trigger shoe and secure it with the included stainless steel roll pin
8. Slide the trigger mechanism assembly back into the lower receiver and screw in the trigger container screw from the bottom
9. Slide the switch assembly into the trigger container and screw in the right hand safety selector
10. Asseble the upper and lower receivers of the weapon and push in the captive pin
11. Point the weapon into a safe area and check the operation of the firearm